Standards of ISO TC92 - FIRE SAFETY

The information on the ISO TC92 page are no longer current. The pages are here for archive purposes only.


Currently, there are 57 ISO standards and DIS related to TC92 and its SCs. These comprise 8 under direct responsibility of the secretariat, 19 under SC1, 15 under SC2, 7 under SC3 and 8 under SC4. A full list is given below according to this breakdown.

Note - the official up-to-date list of these standards is provided on the ISO Online pages for TC92. This document last updated 24.3.99.


ISO standards and DIS under the direct responsibility of the TC Secretariat

ISO 834:1975 Fire-resistance tests - Elements of building construction

ISO 1716:1973 Building materials - Determination of calorific potential

ISO 3008:1976 Fire-resistance tests - Door and shutter assemblies

ISO 3009:1976 Fire-resistance tests - Glazed elements

ISO 3261 Fire tests - Vocabulary

ISO/TR 3956:1975 Principles of structural fire-engineering design with special regard to the connection between real fire exposure and the heating conditions of the standard fire-resistance test (ISO 834)

ISO 5925-1:1981 Fire tests - Evaluation of performance of smoke control door assemblies - Part 1: Ambient temperature test

ISO/DIS 13943 Fire safety - Vocabulary


ISO standards and DIS under TC92/SC1

ISO 1182:1990 Fire tests - Building materials - Non-combustibility test

ISO/DIS 1182 Reaction to fire tests for building products - Non-combustibility test

ISO/DIS 1716 Reaction to fire tests for building products - Determination of the gross calorific value

ISO/TR 3814:1989 Tests for measuring "reaction-to-fire" of building materials - Their development and application

ISO 5657:1997 Reaction to fire tests - Ignitability of building products using a radiant heat source

ISO/TR 5658-1:1997 Reaction to fire tests - Spread of flame - Part 1: Guidance on flame spread

ISO 5658-2:1996 Reaction to fire tests - Spread of flame - Part 2: Lateral spread on building products in vertical configuration

ISO 5660-1:1993 Fire tests - Reaction to fire - Part 1: Rate of heat release from building products - (Cone calorimeter method)

ISO/TR 5924:1989 Fire tests - Reaction to fire - Smoke generated by building products (dual-chamber test)

ISO 9239-1:1997 Reaction to fire tests - Horizontal surface spread of flame on floor-covering systems - Part 1: Flame spread using a radiant heat ignition source

ISO/DIS 9239-1 Reaction to fire tests for floorcoverings - Part 1: Determination of the burning behaviour using a radiant heat source

ISO 9705:1993 Fire tests - Full-scale room test for surface products

ISO/DTR 11696-1 Use of reaction to fire tests - Part 1: Application of results to predict fire performance of building products by mathematical modelling

ISO/DTR 11925-1 Reaction to fire tests - Ignitability of building products subjected to direct impringement of flame - Part 1: Theory of ignitability

ISO 11925-2:1997 Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Part 2: Single flame source test

ISO/DIS 11925-2 Reaction to fire tests for building products - Part 2: Ignitability when subjected to direct impingement of flame

ISO 11925-3:1997 Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Part 3: Multi-source test

ISO/DTR 14696 Reaction to fire tests - Intermediate scale heat release calorimeter

ISO/TR 14697:1997 Fire tests - Guidance on the choice of substrates for building products


ISO standards and DIS under TC92/SC2

ISO/FDIS 834-1 Fire-resistance tests - Elements of building construction - Part 1: General requirements (Revision, in parts, of ISO 834:1975)

ISO/TR 834-3:1994 Fire-resistance tests - Elements of building construction - Part 3: Commentary on test method and test data application

ISO/DIS 834-4 Fire-resistance tests - Elements of building construction - Part 4: Guidance on test data application

ISO/DIS 834-5 Fire-resistance tests - Elements of building construction - Part 5: Specific requirements for loadbearing horizontal separating elements

ISO/DIS 834-6 Fire-resistance tests - Elements of building construction - Part 6: Specific requirements for loadbearing beams

ISO/DIS 834-7 Fire-resistance tests - Elements of building construction - Part 7: Specific requirements for loadbearing columns

ISO 4736:1979 Fire tests - Small chimneys - Testing at elevated temperatures

ISO/TR 5925-2:1997 Fire tests - Smoke control door and shutter assemblies - Part 2: Commentary on test method and test data application

ISO/TR 6167:1984 Fire-resistance tests - Contribution made by suspended ceilings to the protection of steel beams in floor and roof assemblies

ISO 6944:1985 Fire resistance tests - Ventilation ducts

ISO/TR 10158:1991 Principles and rationale underlying calculation methods in relation to fire resistance of structural elements

ISO 10294-1:1996 Fire resistance tests - Fire dampers for air distribution systems - Part 1: Test method

ISO/DIS 10294-2 Fire resistance tests - Fire dampers for air distribution systems - Part 2: Classification, criteria and field of application of test results

ISO/DIS 10294-3 Fire resistance tests - Fire dampers for air distribution systems - Part 3: Comments on the test method

ISO/TR 12470:1998 Fire resistance tests - Guidance on the application and extension of results


ISO standards under TC92/SC3

ISO/TR 9122-1:1989 Toxicity testing of fire effluents - Part 1: General

ISO/TR 9122-2:1990 Toxicity testing of fire effluents - Part 2: Guidelines for biological assays to determine the acute inhalation toxicity of fire effluents (basic principles, criteria and methodology)

ISO/TR 9122-3:1993 Toxicity testing of fire effluents - Part 3: Methods for the analysis of gases and vapours in fire effluents

ISO/TR 9122-4:1993 Toxicity testing of fire effluents - Part 4: The fire model (furnaces and combustion apparatus used in small-scale testing)

ISO/TR 9122-5:1993 Toxicity testing of fire effluents - Part 5: Prediction of toxic effects of fire effluents

ISO/TR 9122-6:1994 Toxicity testing of fire effluents - Part 6: Guidance for regulators and specifiers on the assessment of toxic hazards in fires in buildings and transport

ISO 13344:1996 Determination of the lethal toxic potency of fire effluents


ISO standards under TC92/SC4

ISO/DTR 13387-1 Fire safety engineering - Part 1: Application of fire performance concepts to design objectives

ISO/DTR 13387-2 Fire safety engineering - Part 2: Design fire scenarios and design

ISO/DTR 13387-3 Fire safety engineering - Part 3: Assessment and verification of mathematical fire models

ISO/DTR 13387-4 Fire safety engineering - Part 4: Initiation and development of fire and generation of fire effluents

ISO/DTR 13387-5 Fire safety engineering - Part 5: Movement of fire effluents

ISO/DTR 13387-6 Fire safety engineering - Part 6: Fire spread beyond the enclosure of origin

ISO/DTR 13387-7 Fire safety engineering - Part 7: Detection, activation and suppression

ISO/DTR 13387-8 Fire safety engineering - Part 8: Life safety: occupant behaviour, position and condition


Return to main page